All Euro Logo

Enter Your Full VIN


Select Your Vehicle


  Please select your car  


Did You Find Everything You Wanted?

Who is Bilstein?

BILSTEIN is the world’s leading manufacturer of monotube gas pressure shock absorbers. For more than 60 years, BILSTEIN has been the development partner of choice for OE suspension and shock absorber systems. With their main headquarters located in Germany, BILSTEIN is an original equipment supplier to BMW, Porsche, Mercedes-Benz, Toyota, General Motors, Jeep, Nissan, Ram, SRT and many others. BILSTEIN operates within the thyssenkrupp Automotive Technologies Group.




Bilstein (BILS) 19-136622

Position: Rear

Bilstein B4 model OE replacement This shock comes with no bushings or hardware-Also recommend buffer /boot, 33506771738, 33506771737 bushing and steel cup 33526764418 for the upper mounting and 33526768544 mount for the lower


Bilstein (BILS) 19-103150

Position: Rear

note - follow BMW torque spec on top nut or the shaft will break. No warranty on damaged studs.


Bilstein (BILS) 22-214287

Position: Front Left

Bilstein


Bilstein (BILS) 22-214294

Position: Front Right

Bilstein


Bilstein (BILS) 19-135021

Position: Rear

**Only for cars with Standard Suspension package** Warning! The lower mounting stud will break off if overtightened and is not covered by warranty if broken. make sure to follow BMW torque spec. Also recommend upper and lower mounting bushings/mounts Recommend upper mounting parts: 33506771737, 33506771738, 33526764418 Bilstein


Bilstein (BILS) 24-014298

Position: Front

The first Silver Shadow and Bentley T models were fitted with a hydraulic ram on top of a "Short Stroke" front shock absorber. From VIN 11500 (approximately) the front height control system was deleted and a "Long Stroke" front damper was fitted. A number of cars have been modified from short to long stroke shock absorbers. Cars with short stroke shocks still have the T shaped ram on top of them which is visible when you lift the bonnet. Cars with long stroke shocks just have the circular top plate visible under the bonnet through the centre of which you can see the top of the damper piston. Before ordering short stroke dampers please confirm whether your car has been modified. To convert you also need ur23569U top plate and UR72172 gasket x2 each


Bilstein (BILS) 24-014304

Position: Rear

Bilstein B6 Performance


Bilstein (BILS) 36-226153

Position: Front

Bilstein


Bilstein (BILS) 19-171609

Position: Rear

Bilstein


Bilstein (BILS) 24-023726

Position: Front

*Note- This shock has the the same dimensions and travel as the original shock, Compression rate is the same but Rebound rate is 25% higher then original for improved handling! Only for cars without Adaptive Damping Control Bilstein


Bilstein (BILS) 38-129230

Position: Rear

Bilstein


Bilstein (BILS) 22-230874

Position: Front Right

Bilstein


Bilstein (BILS) 22-230867

Position: Front Left

Bilstein


Bilstein (BILS) 24-067263

Position: Front

Bilstein


Bilstein (BILS) 36-264087

Position: Rear

Bilstein


Bilstein (BILS) 22-141705

Position: Front

This is only for 2wd models. recommend socket for removing slotted nut above mount but under limiting strap. T-MB-203-STRUT


Bilstein (BILS) 36-264971

Position: Front

Only for cars with 4 green paint marks Bilstein


Bilstein (BILS) 24-166652

Position: Front

Bilstein


Bilstein (BILS) 36-199662

Position: Rear

Bilstein


Bilstein (BILS) 19-151069

Position: Rear

Bilstein