All Euro Logo

Enter Your Full VIN


Select Your Vehicle


  Please select your car  


Did You Find Everything You Wanted?

Who is Denso?

Quality, Reliability and Value. At DENSO, we have taken everything we have learned as an OE manufacturer and applied it to our aftermarket product lines. Every component that leaves our factories has been designed with precision, manufactured to OE standards, and subjected to rigorous safety and performance tests. In fact, 20 of the top automaker schoose DENSO for their new vehicles. You should, too.





Denso (DENS) 471-1293

Position: Not Applicable

*Need O' ring part# 210-997-03-45 AND 140 997 0745 X2 Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount ofoil in it during assembly and must be drained and the proper amount of nd8 specific oil replaced during installation. This compressor requires ND8 oil.



Denso (DENS) 471-1594

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific PAG46 oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event.


Denso (DENS) 471-0233

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the old compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This compressor requires ND8 oil.



Denso (DENS) 471-1466

Position: Not Applicable

Also send 2109970345 O-ring/45 Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific ND8 oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This compressor requires ND8 oil.


Denso (DENS) 999-0101

Position: Not Applicable

Denso Original-This is a 250cc bottle 46 viscosity We also recommend a syringe to add the proper amount.Use part number T-uni-syringe100 We also offer a graduated beaker to measure what is being removed to inspect be able to replace proper amount of oil. See part number T-UNI-BEAKER-250 also see www.alleuro.com tech tips

(Discount Applied at Checkout)

Denso (DENS) 471-1119

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the old compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This unit requires ND8 oil


Denso (DENS) 471-1542

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the old compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This unit requires ND8 oil Aluminum One time use bolts must be replaced 64550392602


Denso (DENS) 471-0124

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event.



Denso (DENS) 5302

Position: Not Applicable

for v8 models only Denso

(Discount Applied at Checkout)


Denso (DENS) 6010

Position: Not Applicable

Denso

(Discount Applied at Checkout)


Denso (DENS) 471-1224

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the old compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This compressor requires ND8 Oil



Denso (DENS) 471-1434

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This compressor requires ND8 oil. Warning! This variable displacement compressor has a special oil filling procedure that is different than the industry normal process. If oil is not added in the correct way the valve will probably fail and there is no warranty in this situation. Check vehicle manufacturer specific oil filling instructions before starting.


Denso (DENS) 471-1529

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the old compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. * This unit requires ND8 oil and aluminum bolt kit 64550392602 Denso OEM


Denso (DENS) 673-9304

Position: Not Applicable

Denso


Denso (DENS) 471-0128

Position: Not Applicable

Denso OE A/C Compresoor, Totally interchangeable with 471-0127 Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the old compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event.


Denso (DENS) 471-1543

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. Denso


Denso (DENS) 471-1532

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This unit requires ND8 oil Warning! This variable displacement compressor has a special oil filling procedure that is different than the industry normal process. If oil is not added in the correct way the valve will probably fail and there is no warranty in this situation. Check vehicle manufacturer specific oil filling instructions before starting.



Denso (DENS) DSN1205

Position: Not Applicable


Core Price: $70.00



Denso (DENS) 471-1360

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific ND8 oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This unit requires ND8 oil



Denso (DENS) 471-1586

Position: Not Applicable

Receiver Drier replacement is mandatory as a condition for warranty acceptance. The compressor has an undesignated amount of oil in it during assembly and must be drained and the proper amount of specific oil replaced during installation. If the compressor has seized the condenser will also have to be replaced or debris will cause new compressor to fail and is not covered in that event. This unit requires ND8 oil-